Attaching a Cord End - Style 6

See the tabs below for all products and tools used in this technique, plus any additional tips that may be helpful to you!

Inspiration Level 
Approximate Finished Length3mpty
Printer-Friendly
Tip 1Adding Hypo Cement where you are wrapping the wire will help to keep the cord secure.
Tip 23mpty
Tip 33mpty
Tip 43mpty
Tip 53mpty
Tip 63mpty
Tip 73mpty
Tip 83mpty
Tip 93mpty
Tip 103mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

Step 1

String your cord end through a closed jump ring and make a loop. Leaving a 1 inch tail.

Step 2

About a half inch down from the tail. Begin wrapping a 4 inch piece of wire around the looped cord end.

Step 3

Continue wrapping the wire down the cord for a total of 6 wraps.

Option:

For a different look you can keep wrapping the wire down the cord.

Step 4

Using wire cutters, cut the excess wire on both ends.

Step 5

Using chain nose pliers, crimp down both ends of wire so the wrap is nice and secure.

Step 6

Using scissors cut any excess cord.

Step 7

You have completed one end of your wire wrapped cord end.

Step 8

Repeat steps 1-6 for the other end of the cord.

Step 9

Congratulations! You have completed your wire wrapped cord ends!

   

Copyright © 2004 – 2014 Fusion Beads, Inc. FusionBeads.com®

Fusion Beads Inc, Beads, Seattle, WA