Share the Inspiration!
See the tabs below for all products, tools and techniques used to make this piece, plus related Inspiration designs and any additional tips that may be helpful to you!
A glass dome is an easy alternative to resin or glaze in a bezel pendant. Follow our easy steps to assembling a personalized piece.
Bezel by Nunn Design
Glass Dome by Nunn Design
Glue by Nunn Design
Beading Scissors 1-1/4 in. Blade
5 Piece Nylon Brush Set
You will need a Collage sheet by Nunn Design (or an image of your choice), a glass dome and a corresponding bezel by Nunn Design as well as Nunn Design glue. You will also need a paint brush, scissors and a pencil.
Use the glass dome as a template and choose the area you wish to cut out.
Trace the glass dome with a pencil.
Cut out the image on the traced line.
Paint a thin layer of Nunn Design glue onto the back of the glass dome using a paint brush.
Carefully apply the back of the glass dome to the image. Apply pressure to remove any air bubbles. Set aside to dry for 5 to 10 minutes.
Apply a thin layer of glue to the front inside surface of the Nunn Design bezel using a paint brush.
Add the dome to the glued area, paper side down, press firmly and let dry for 5 to 10 minutes.
Congratulations! You have created a glass dome bezel pendant!