Creating a Laced Bezel Pendant

See the tabs below for all products and tools used in this technique, plus any additional tips that may be helpful to you!

A bezel lace gives a beautiful embellishment to a bezel pendant. Follow our easy steps to assembling a personalized piece.
Inspiration Level 
Approximate Finished Length3mpty
Printer-Friendly
Tip 13mpty
Tip 23mpty
Tip 33mpty
Tip 43mpty
Tip 53mpty
Tip 63mpty
Tip 73mpty
Tip 83mpty
Tip 93mpty
Tip 103mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

Step 1

You will need paper, a glass dome and a corresponding bezel and corresponding bezel lace by Nunn Design as well as Nunn Design glue. You will also need a paint brush, scissors and a pencil.

Step 2

Use the glass dome as a template and choose the area you wish to cut out.

Step 3

Trace the glass dome with a pencil.

Step 4

Cut out the image on the traced line.

Step 5

Paint a thin layer of Nunn Design glue onto the back of the glass dome using a paint brush.

Step 6

Carefully apply the back of the glass dome to the image. Apply pressure to remove any air bubbles. Set aside to dry for 5 to 10 minutes.

Step 7

Apply a thin layer of glue to the front inside surface of the Nunn Design bezel using a paint brush.

Step 8

Add the bezel lace to the glued area. Apply pressure to secure the lace. Let the glue dry for 5 to 10 minutes.

Step 9

Apply a thin layer of glue to the inside of the bezel lace using the paint brush.

Step 10

Add the dome to the glued area, paper side down, press firmly and let dry for 5 to 10 minutes.

Step 11

Congratulations! You have created a laced bezel pendant!

 

Copyright © 2004 – 2014 Fusion Beads, Inc. FusionBeads.com®

Fusion Beads Inc, Beads, Seattle, WA