Finishing ICE Resin - Doming

See the tabs below for all products and tools used in this technique, plus any additional tips that may be helpful to you!

After you’ve made a molded piece from ICE Resin, finish it with an elegant domed top surface.
Inspiration Level 
Approximate Finished Length3mpty
Printer-Friendly
Tip 13mpty
Tip 23mpty
Tip 33mpty
Tip 43mpty
Tip 53mpty
Tip 63mpty
Tip 73mpty
Tip 83mpty
Tip 93mpty
Tip 103mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

Step 1

Mix a small batch of resin. For more detailed instructions see Using ICE Resin with Bezel Pendants Technique.

Step 2

Choose a finished molded ICE resin piece. We chose an oval shape from a resin mold.

Step 3

Add the same color you used for the molded resin piece. We are using two drops of red opague pigment.

Step 4

Using a stir stick start mixing the pigment with the ICE Resin.

Step 5

You have now added color to your ICE Resin to match the molded resin piece.

Step 6

Place your molded resin piece on a flat work surface with the back facing up.

Step 7

Slowly begin to pour the ICE Resin over the back of the molded resin piece.

Step 8

Using a stir stick gently guide the ICE Resin over the molded resin piece until it is evenly covered. Make sure the ICE Resin goes all the way to the edges.

Step 9

Let the ICE Resin fully cure for a minimum of three days.

Step 10

Congratulations! You have now finished your molded ICE Resin piece using the doming technique.

   

Copyright © 2004 – 2014 Fusion Beads, Inc. FusionBeads.com®

Fusion Beads Inc, Beads, Seattle, WA