Share the Inspiration!
See the tabs below for all products, tools and techniques used to make this piece, plus related Inspiration designs and any additional tips that may be helpful to you!
Rivoli components are specially designed findings for Swarovski Elements Crystal Rivoli Stones. Our easy instructions show you how to adhere your favorite stones to these findings.
12mm Swarovski Elements Crystal Rivoli Stones
5 Minute Epoxy
Disposable tray or paper plate
The 5 Minute Epoxy will become tacky and hard to use quickly. Once mixed, you will have about 4-5 minutes of working time.
Pick the Rivoli Component you would like to use and the Swarovski Elements Crystal Rivoli Stone.
Squeeze a small amount of 5 Minute Epoxy in a disposable tray or paper plate. It is very important to use an even amount of the 2-part epoxy.
Mix the 2 parts together thoroughly with a toothpick (about 20 seconds). Once you have mixed the epoxy, you have about a 4-5 minute window to work in before the epoxy becomes too hard and stringy to work with.
With your toothpick, apply a thin coating of the epoxy to inside of the Rivoli Component.
Place your Swarovski Elements Crystal Rivoli Stone into the Rivoli Component.
Gently press down on the Swarovski Elements Crystal Rivoli Stone to make sure it is secure in the Rivoli Component.
Let the epoxy completely set up for 15 minutes. Congratulations! You have glued your Swarovski Elements Crystal Rivoli Stone into your Rivoli Component.