Share the Inspiration!
See the tabs below for all products, tools and techniques used to make this piece, plus related Inspiration designs and any additional tips that may be helpful to you!
Make your jewelry length adjustable by attaching a premade extender chain.
Print these instructions
Premade Extender Chain
Lobster Claw Clasp
Soft Flex Beading Wire
Chain Nose Pliers
String a crimp bead onto the Soft Flex.
String one end of the clasp on the Soft Flex. Then go back through the crimp bead, creating a loop around the clasp.
Make sure that the wires are lying parallel to each other. Place the crimp bead into the back notch of the crimping pliers.
Squish the crimp bead with the crimping pliers.
Turn the crimp bead a quarter turn and place the crimp bead in the front notch of the crimping pliers.
Gently squish the crimp bead with the crimping pliers. This will fold the crimped bead over on itself.
Use the wire cutter to cut off the small tail of the Soft Flex.
String beads onto the Soft Flex until you have reached your desired length.
String a crimp bead and the end of the premade extender chain on the Soft Flex. Pass the Soft Flex back through the crimp bead, creating a loop around last link in the premade extender chain and crimp with the crimping pliers.