Making a Domed Surface with ICE Resin

See the tabs below for all products and tools used in this technique, plus any additional tips that may be helpful to you!

After you’ve created an ICE Resin component, giving it a domed surface will add an elegant finish.
Inspiration Level 
Approximate Finished Length3mpty
Printer-Friendly
Tip 13mpty
Tip 23mpty
Tip 33mpty
Tip 43mpty
Tip 53mpty
Tip 63mpty
Tip 73mpty
Tip 83mpty
Tip 93mpty
Tip 103mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty
3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

3mpty

Step 1

Mix a small batch of resin. For more detailed instructions see Using ICE Resin with Bezel Pendants Technique.

Step 2

You will want to use a pendant that has been filled with ICE Resin about 3/4 of the way full and has soft cured for a minimum of six hours. For more detailed instructions see the Using ICE Resin with Picture Frames Technique.

Step 3

Place the pendant on an even work surface. Slowly pour a small amount of ICE Resin over the previous layer in the pendant. This will dome the Ice Resin giving the image a magnified look.

Step 4

Let the ICE Resin fully cure for a minimum of three days.

Step 5

Congratulations! You have created a domed ICE Resin piece to use in your jewelry designs.

 

Copyright © 2004 – 2014 Fusion Beads, Inc. FusionBeads.com®

Fusion Beads Inc, Beads, Seattle, WA