Share the Inspiration!
See the tabs below for all products, tools and techniques used to make this piece, plus related Inspiration designs and any additional tips that may be helpful to you!
Print these instructions
Metal Piece (we used a sterling silver blank charm)
Bench Block Helper with Steel and Nylon Blocks
Round Dimples & Narrow Pinstripe Texturing Hammer
Tape - optional
Place the metal piece on the bench block.
Hold the metal piece down with your finger. If you do not feel comfortable holding the metal with your finger, you may place a small piece of tape along the edge to keep the metal in place.
Using the pinstripe side of the texturing hammer, hit the metal several times in a random pattern.
Hammer the metal piece until it is completely textured.
Rotate the metal piece and continue hammering to texture the area that was held by your finger or tape.
Congratulations! The metal piece is now completely textured.