Share the Inspiration!
See the tabs below for all products, tools and techniques used to make this piece, plus related Inspiration designs and any additional tips that may be helpful to you!
A pendant or component with a raised surface gives any collage image a distinctive frame. Follow our easy steps for a flawless result.
Print these instructions
White glue, Gem Tac, or Hypo Cement
Beading Scissors 1-1/4 in. Blade
Cut the image slightly smaller than the raised surface to allow the resin to fully cover the edge of the image.
After the image is on the pendant, you can apply a thin layer of white glue or decoupage to seal the image before adding resin.
Cut out your desired image from the collage sheet using scissors or a coordinating paper punch. Trim the image slightly smaller than the raised surface.
Completely cover the raised surface with a thin layer of glue. White glue, Gem Tac, or Hypo Cement will work well.
Lay the image evenly on the raised surface.
Working from the center out, use a Q-tip to press out any air bubbles that may be trapped under the collage image.
Let the glue dry completely. To finish you can now add ICE Resin, Diamond Glaze, or Amazing Glaze to your pendant.