 |  |
 | |
 |
|
Step 1
Place pegs in a circular pattern working in the second circular row from the center. Leave an empty space in between each of the pegs. | | Step 2
Cut a piece of wire 6 inches long. Place one end of the wire between the top and left peg. Bend the wire to a right angle. | | Step 3
Begin wrapping the wire around the top peg. |
|
 | |
 | |
 |
|
Step 4
After wrapping the wire completely around the top peg, bring the wire down around the next peg to the right. | | Step 5
After wrapping the wire completely around the peg, bring the wire down around the next peg to the right. | | Step 6
After wrapping the wire completely around the peg, bring the wire up around the bottom peg. |
|
 | |
 | |
 |
|
Step 7
Repeat steps 5-6 until you reach the last peg. | | Step 8
After wrapping the wire completely around the last peg, bring the wire up around the top peg again. | | Step 9
Wrap the wire around the top peg. This will create a second loop around the top peg. |
|
 | |
 | |
 |
|
Step 10
Take the wire form off of the wig jig. Use your wire cutters to cut off the end of the wire. This will leave a simple loop on one side of the form. | | Step 11
Repeat step 10 on the other side of the wire form. | | Step 12
Using your chain nose pliers, grasp the side of the loop. |
|
 | |
| |
 |
|
Step 13
Close the loop by moving the open side of the loop back until the loop is closed | | Step 14
Repeat steps 12 and 13 for the other side of the wire form. | | Step 15
Make several forms and link them together for a necklace, bracelet or earrings. Also, try hanging beads off of loops. |
|
