 |  |
 | |
 |
|
Step 1
Cut the Soft Flex 2 inches longer then your desired finished length. Cut the wire lace twice as long as the Soft Flex. String a 2x2mm crimp bead onto the Soft Flex. | | Step 2
String one end of the clasp on the Soft Flex. Then go back through the crimp bead, creating a loop around the clasp. | | Step 3
Crimp the crimp bead using the crimping pliers. |
|
 | |
 | |
 |
|
Step 4
Use a wire cutter to cut off the excess Soft Flex. | | Step 5
String another 2x2mm crimp bead onto the Soft Flex. | | Step 6
Twist the wire lace into a point. |
|
 | |
 | |
 |
|
Step 7
Thread the point of the wire lace through the last crimp bead. Then crimp the crimp bead using the crimping pliers. | | Step 8
Use a wire cutter to cut off the excess wire lace. | | Step 9
Cover each of the crimp beads with a crimp bead cover. |
|
 | |
 | |
 |
|
Step 10
String several beads onto the Soft Flex. | | Step 11
Using your Soft Flex, go through the wire lace at a point twice as long as the strung beads. | | Step 12
String a crystal onto the Soft Flex. |
|
 | |
 | |
 |
|
Step 13
Using the Soft Flex, go back through the wire lace. | | Step 14
Continue with this pattern until you have reached your desired finished length. | | Step 15
To finish, twist the wire lace into a point. |
|
 | |
 | |
 |
|
Step 16
String a crimp bead onto the wire lace and the Soft Flex. Crimp your crimp bead with the crimping pliers. | | Step 17
Use a wire cutter to cut off the excess wire lace. | | Step 18
String another 2x2mm crimp bead onto the Soft Flex. |
|
 | |
 | |
 |
|
Step 19
String the other end of the clasp onto the Soft Flex and go back though the crimp bead creating a loop around the clasp. Then crimp the crimp bead with the crimping pliers. | | Step 20
Cover all the crimp beads with crimp bead covers. | | Step 21
Then gently pull the wire lace apart, creating a scalloped look. |
|
