 |  |
 | |
 |
|
Step 1
Once you have completed your right angle weave piece, weave back down and around in a figure 8 pattern and exit your needle through the horizontal bead second from the top. | | Step 2
String 3 size 11 seed beads in a coordinating color. | | Step 3
Stringing one 4mm bicone crystal bead and 15 size 11 seed beads.
Tip: The number of seed beads needed to make this loop may vary depending on the size of your bead on the opposite side of the clasp. |
|
 | |
 | |
 |
|
Step 4
Go back through the 4mm bicone and the first 3 seed beads. | | Step 5
Go through bead A. | | Step 6
Go up through bead D. Continue going through beads C, B, A, and D several times to secure your end. Exit your thread through bead D. |
|
 | |
 | |
 |
|
Step 7
Cut your thread. Clean up the ends of your thread, using a Perfect End Thread Burner. Burn, or melt, the end of your thread until the end is no longer visible. | | Step 8
One loop is finished. To begin your second loop, go through a side bead and weave around in a figure 8 pattern to secure the end of the thread. | | Step 9
Exit your needle through the horizontal bead second from the bottom. |
|
 | |
 | |
 |
|
Step 10
String 3 size 11 seed beads in a coordinating color. | | Step 11
Stringing one 4mm bicone crystal bead and 15 size 11 seed beads. | | Step 12
Go back through the 4mm bicone and the first 3 seed beads. |
|
 | |
 | |
 |
|
Step 13
Go through bead A. | | Step 14
Go down through bead D. Continue going through beads C, B, A, and D several times to secure your end. Exit your thread through bead D. | | Step 15
Cut your thread. |
|
 | |
 | |
|
|
Step 16
Clean up the ends of your thread, using a Perfect End Thread Burner. Burn, or melt, the end of your thread until the end is no longer visible. | | Step 17
Both loops are complete. The number of loops may vary depending on the width of your right angle weave piece. | | Step 18
To begin the other side of your clasp, go through a side bead and weave around in a figure 8 pattern to secure the end of the thread. Exit your needle through the horizontal bead second from the top. |
|
 | |
 | |
 |
|
Step 19
String 5 size 11 seed beads. | | Step 20
String one 6mm round crystal and one seed bead. | | Step 21
Go back through the 6mm crystal. |
|
 | |
 | |
 |
|
Step 22
Go back through the 5 seed beads. | | Step 23
Go through bead A. | | Step 24
Go up through bead D. Continue going through beads C, B, A, and D several times to secure your end. Exit your thread through bead D. |
|
 | |
 | |
|
|
Step 25
Cut your thread. Clean up the ends of your thread, using a Perfect End Thread Burner. Burn, or melt, the end of your thread until the end is no longer visible. | | Step 26
To begin your second loop, go through a side bead and weave around in a figure 8 pattern to secure the end of the thread. | | Step 27
Exit your needle through the horizontal bead second from the bottom. |
|
 | |
 | |
 |
|
Step 28
String 5 size 11 seed beads. | | Step 29
String one 6mm round crystal and one seed bead. | | Step 30
Go back through the 6mm crystal. |
|
 | |
 | |
 |
|
Step 31
Go back through the 5 seed beads. | | Step 32
Go through bead A. | | Step 33
Go down through bead D. Continue going through beads C, B, A, and D several times to secure your end. Exit your thread through bead D. |
|
 | |
 | | |
|
Step 34
Cut your thread. Clean up the ends of your thread, using a Perfect End Thread Burner. Burn, or melt, the end of your thread until the end is no longer visible. | | Step 35
Both sides of your clasp are now complete. | |
|
|
