 |  |
 | |
 |
|
Step 1
Create a flat right angle weave piece. This piece is five 4-bead units by three rows. | | Step 2
Bring both sides of the piece together. The outer edge beads should match up. | | Step 3
Make sure that the thread is coming up through the bottom left edge bead. |
|
 | |
 | |
 |
|
Step 4
String one bead. | | Step 5
Go down through the bottom right edge bead. | | Step 6
String one bead. |
|
 | |
 | |
 |
|
Step 7
Go back up through the bottom left edge bead. | | Step 8
Go back through the added bead that is second from the bottom. | | Step 9
Go up through the next edge bead on the right. |
|
 | |
 | |
 |
|
Step 10
String one bead. | | Step 11
Go down through the edge bead second from the bottom. | | Step 12
Go back through the added bead second from the bottom. |
|
 | |
 | |
 |
|
Step 13
Go back up through the right edge bead second from the bottom. | | Step 14
Go back through the third added bead from the bottom. | | Step 15
Go up through the left edge bead third from the bottom. You have now woven the needle around in a figure-8. |
|
 | |
 | |
 |
|
Step 16
String one bead. | | Step 17
Go down through the right edge bead third from the bottom. | | Step 18
Go back through the third added bead from the bottom. |
|
 | |
 | |
 |
|
Step 19
Go up through the third edge bead from the bottom. | | Step 20
Go through the fourth added bead from the bottom. | | Step 21
Go up through the right edge bead fourth from the bottom. |
|
 | |
 | |
 |
|
Step 22
String one bead. | | Step 23
Go down through the left edge bead fourth from the bottom. | | Step 24
Go back through the fourth added bead from the bottom. |
|
 | |
 | |
 |
|
Step 25
Go back up through the right edge bead fourth from the bottom. | | Step 26
Go through the fifth added bead from the bottom. | | Step 27
Go up through the left edge bead fifth from the bottom. |
|
 | |
 | |
 |
|
Step 28
String one bead. | | Step 29
Go down through the right edge bead fifth from the bottom. | | Step 30
Go back through the fifth added bead from the bottom. |
|
 | |
 | |
 |
|
Step 31
Reinforce the tube bead by going through the beads in a figure-8 fashion. | | Step 32
Cut the thread. | | Step 33
Clean up the ends of your thread, using a Perfect End Thread Burner. Burn, or melt, the end of your thread until the end is no longer visible. |
|
 | |
 | |
 |
|
Step 34
Congratulations! You have completed a right angle weave tube bead! | | Step 35 - Connecting Two Ends or Two Tube Beads
Make sure that the two ends or two tube beads are the same thickness. In this case the tubes are 4 beads thick. | | Step 36
Turn the tubes so the ends to be connected are facing you. |
|
 | |
 | |
 |
|
Step 37
Go up through the left bead on the right tube. | | Step 38
String one bead. | | Step 39
Go down through the right bead on the left tube. |
|
 | |
 | |
 |
|
Step 40
String one bead. | | Step 41
Go back up through the left bead on the right tube. | | Step 42
Go through those four beads again to reinforce the connection. Exit the needle through the top center bead. This has now connected the tubes on one of the four sides. |
|
 | |
 | |
 |
|
Step 43
Bring the two ends of the tubes together so that they lay paralell to each other. | | Step 44
Having come out of the center bead, now go down through the next edge bead on the left tube. | | Step 45
String one bead. |
|
 | |
 | |
 |
|
Step 46
Go up through the edge bead on the right tube. This will finish the connection on this side of the tube. | | Step 47
Go back though those four beads again to reinforce the connection. Exit the needle from the bottom bead. | | Step 48
Rotate the tube so the bead you just exited from is at the top. |
|
 | |
 | |
 |
|
Step 49
Go down through the edge bead on the right tube. | | Step 50
String one bead. | | Step 51
Go up through the edge bead on the left tube. |
|
 | |
 | |
 |
|
Step 52
Go back through the top bead. | | Step 53
Go through those four beads again to reinforce the connection. Exit the needle from the bottom bead. | | Step 54
Rotate the tube again so that the bead that you just exited from is at the top. |
|
 | |
 | |
 |
|
Step 55
Reinforce the last of the four sides by going through the left bead. | | Step 56
Go through the bottom bead. | | Step 57
Go up through the right bead. |
|
 | |
 | | |
|
Step 58
Go through those four bead again to reinforce the connection. | | Step 59
Congratulations! The two ends of the right angle weave tubes are now connected. | |
|
|
