For this technique we will be using the Rivet Die Set with a Swarovski Crystal Rivet.
Hold the Crystal Applicator Tool so the spring end is up.
Place the lower die into the bottom of the Crystal Applicator Tool. Turn the screw until the bottom die is secure. (We are using the RVT 1 lower die).
Place the upper die over the Crystal Applicator Tool. Turn the screw until the upper die is secure. (We are using the SS29 Upper die).
Place the lower (disc) part of the rivet into the lower die, making sure the smooth end is down.
Place the crystal rivet face up into the upper die. The rivet will be held in place by the cover over the upper die. (We are using a SS29 crystal rivet).
Place the material you want your rivet to go through along the bottom of your Crystal Applicator Tool. Press down firmly to secure your rivet. (We are using a 10mm leather strip).
Congratulations! You have successfully used the Crystal Applicator Tool to add a crystal rivet.
- Using the Crystal Applicator Tool with Rivets | Fusion Beads