Using Transfer Images with a Bezel Pendant
A transfer image uses nothing but ordinary water for perfect adhesion. Our Beading Technique shows you how to use transfers with bezel pendants.
Print this Technique
Cut out your desired image from the transfer image sheet using scissors or a coordinating paper punch.
Submerge the transfer image into a bowl of room temperature water. Let soak for a minimum of one minute.
After submerging the transfer image in water the backing will start to seperate from the ""film-like"" image.
Using your thumb and forefinger slide the transfer image off of the backing slightly.
Set the edge of the transfer image face up in the pendant.
Continue sliding the backing off laying the transfer completely in the pendant.
Use a Q-tip to press the transfer image into the pendant working from the center out. By using the Q-tip you are also getting any trapped water or air out from under the transfer image.
Make sure the transfer image is dry before you add Resin by Nunn Design, ICE Resin or Diamond Glaze to your pendant. Do not use Amazing Glaze with the transfer images, the heat will melt the film-like transfer image.
- Using Transfer Images with a Bezel Pendant | Beading Techniques | Fusion Beads